We design and manufacture a complete selection of constant force springs that can be used for various applications, across virtually every industry, from healthcare to aerospace and within general household items.

This blog will look at what a constant force spring is, common applications and how we design these widely used mechanisms.

What is a Constant Force Spring? 

Constant force springs (or constant torque springs) get their name because their force of motion is at constant exertion. The load is determined by the width and thickness of the material and the diameter of the coil.

The tightly wound roll works in a linear movement and does not obey Hooke’s law (F=kX) but constantly produces force throughout its deflection.

These springs provide a smooth range of motion and a constant load in extending or retracting. The full load of the spring is reached after being deflected to a length equal to 1.25 times its diameter and it can sustain a constant force regardless of the extension length.

Constant force springs can be fitted in a variety of ways and extended either partly or completely, which allows them to be used for a range of applications because of the lack of limitations on extension speed and acceleration.

Fitting a Constant Force Spring 

The fitting can be completed in a number of ways. For long extensions, the spring must be laterally guided to prevent movement in a sideways direction — suitable play on each side is 0.5 – 1.5 mm. 

When fitting on a bearing or conduit, the spring can be located using its own force providing that sufficient strip length remains on the bearing. If there is no operating extension limit in the application, we recommend that a screw or rivet is used to secure the inner end of the spring.

Our standard springs and slide bearings are normally supplied separately. Fitting is done by loosening the outer end of the spring and winding it onto the bearing (securing it if necessary), after which the complete spring is wound onto the bearing.

Constant Force Spring Applications  

A constant force spring is an excellent device for applications where a constant load is required. The many benefits of these springs make them suitable for a number of applications. 

The spring itself has a small space requirement which allows it to provide a smooth range of motion. With no inertia to overcome, constant force springs are very versatile and can mount to existing hardware, as well as create a counterbalancing effect. 

Constant force springs are widely used across the medical and healthcare industries to improve surgical devices. They are also used regularly in aviation to deploy and retract aircraft doors and efficiently counterbalance aeroplane windows.

You will also find constant force springs in many day-to-day applications, such as door closers, hairdryers, gym equipment, electric motors, cabinet furniture components and much more.

Innovative Design and Technology 

We’ve been designing springs for over 70 years, and so our range is exceptionally varied and technologically advanced. Besides our standard range, we can provide customised solutions using design capabilities that feature our advanced, proprietary spring design software.

Our software package has been developed in-house and we can simulate any type of application, which enables us to calculate the force required for your particular design. 

Our regular constant force springs are wrapped on a drum with the free end attached to the loading force. However, your preferred mounting method will impact the way we design your spring.

Our skilled design team can help by determining a suitable method to rule out any problems, even if you haven’t decided upon the exact specifications.


As an experienced spring manufacturer, we have the expertise to create a whole host of springs perfect for any application within any industry.

Take a look at our stock catalogue for more information on our range of springs and forms. 

As an experienced spring manufacturer, we see many uses for springs throughout the medical industry, and it’s fair to say that the sector would be very different without them. Most of the equipment and systems used on a day to day basis require springs to operate efficiently.

We’re proud to manufacture and supply a wide range of medical stampings for the healthcare industry. In this blog, we’ll discuss some of the most common uses of springs within this sector, including how gas springs are used and how prosthetics are made.

Medical Stampings for the Healthcare Industry

Medical components are always designed and manufactured with the highest quality in mind. With smart technology and streamlined processes, the whole sector relies on products to help patients and continue research.

Bespoke stampings, gas springs and compression springs are all used regularly throughout the healthcare industry. While medical engineering uses slightly different components, they have similar designs and features, including the requirement to comply with industry standards.

Gas Springs Applications in the Medical Industry

Due to their versatility, gas springs can be applied to a wide range of equipment and adjustable applications in the healthcare industry.

The spring itself is made up of a cylindrical body filled with nitrogen gas, a piston rod, a seal and a guiding function that allows the mechanism to extend and compress as required.

Below, we’ve listed some of the most popular uses for our gas spring and strut range:

  1. Flow control valves
  2. Healthcare beds
  3. Physiotherapy beds
  4. Pressure regulators
  5. Patient trolley systems
  6. Positive pressure ventilator
  7. CPAP machines
  8. Robotic-assisted surgery

Springs in Prosthetics

Progress in engineering and manufacturing has allowed artificial limbs and joints to change the lives of millions of people worldwide, and the field of medical prosthetics is still advancing.

Prosthetics date back to over 3,000 years ago in Egypt, where archaeologists discovered a carved wooden toe with a piece of leather that fits onto a foot. In the 16th century, Ambroise Paré, an innovative French battlefield surgeon, created the first functional mechanical limb — a hand with flexible fingers that worked with catches and springs.

The 19th century saw the creation of articulated prosthetic limbs, and while prosthetic limbs have existed for a long time, their use rose dramatically in the UK after World War I.

Manufacturers of medical prosthetics continue to break boundaries, creating life-like limbs that combine aesthetics with functionality.

The Technology of Today

3D-printed prosthetics are becoming more common due to the nature of them being less cost-prohibitive. They can easily be designed for each individual and are a necessity for developing countries where most citizens can’t afford expensive medical prosthetics.

Award-winning company Open Bionics are known for turning children with limb differences into bionic heroes with their fascinating 3D-printed limbs. The UK-based company also works closely with the NHS, working to help amputees write, walk, and shake hands again.


With over 70 years of experience as a spring manufacturer, we have the expertise to create a whole host of springs perfect for any application within any industry.

If you’d like to find out more, please take a look at our ‘springs in various industries’ brochure (PDF) or browse our spring catalogue to find the correct medical springs for your medical components.

Over the last 12 months, we have endured tough, restrictive lockdowns, and as a result, consumers have adapted their shopping habits. The number of online transactions and the demand for products has been record-breaking, but what does this mean for manufacturing? 

While smart manufacturing has already enabled streamlined processes, demand and growth in online shopping have boosted the manufacturing industry.

As an industry leader in spring manufacturing, we believe it’s not going to stop anytime soon. This new shopping behaviour has been integrated into our routine.

In this blog, we’ll discuss online shopping, including the positive impact of this consumer behaviour on manufacturing, new norms and the increase in demand online. 

Adapting to High Demand 

The pandemic urged more shoppers online and the demand for certain products is now booming as a result of this increase. Items such as smoke alarms and carbon monoxide detectors have driven the demand for components like spring pressings and battery contacts directly from our manufacturing customers.

With many manufacturers feeling the pressure to produce high-quality items in larger volumes, the relationship between manufacturers and their customers is becoming more important. 

Many manufacturing firms are attending to the direct needs of their customers by investing more time and budget into data-driven insights, which can inform their operational strategies.

Expansion and Job Opportunities  

The increase in online shopping can extend your global reach and provide a boost for workers, who can become more involved in logistical, technological and strategic tasks.

With the implementation of new smart technologies coupled with the boom in online sales, we believe that manufacturers are placed to offer better-paying and more rewarding jobs in the near future.

You can invest in hiring skilled employees to operate equipment, manage websites and stock, as well as work toward running a more sustainable and efficient business.

Continued Digital Investment 

The impact of COVID-19 exposed many manufacturing companies that relied solely on a physical workspace and large labour force. 

AI and Smart Factory technology have been around for a while, and those who have invested in smart-tech are reaping the rewards from online sales and much more. By building your businesses and streamlining your processes, you can benefit from working at normal capacity under most circumstances.

By investing in technologies such as machine learning, robotics, edge computing, the 5G network, sensors, and cloud computing, you can enrich your supply chain, build for the future of online shopping and identify areas for machine investment and growth.

The future of manufacturing is indeed nodding toward a more automated approach, so it’s essential to keep up with not only your competitors but your customers, who are now spending more time online than ever. 

By shifting to a digitally-led approach, you can quickly improve your offering to customers worldwide. It’s never too late to invest in automation, including taking steps like training your team on the latest technologies. Implementing a robust process can safeguard against future pandemics, save time and money, as well as build your business for the future. 

Localising Production and Sustainable Working

Online shopping has advanced significantly, so much so that more people are now thinking about their consumption habits, especially with regards to environmental pollution and the ethical impacts of imported goods.

Many manufacturers are moving toward a more conscious approach, and their online shop is an extension of this. 

When you combine consumer behaviour with ongoing trade wars and tariff negotiations that have affected supply chains, the future of manufacturing will likely consider the benefits of purchasing and selling local goods. 

At European Springs & Pressings, we’re committed to ensuring that our supply chain remains as robust as ever, and you’ll find that our products proudly display the ‘Made In Britain’ logo.

Access to data surrounding online trends means that manufacturers can reduce waste, promote recycled materials, or even switch to green energy sources. 


As one of the most reliable and highly praised spring manufacturers in Europe, we’re excited to see what the future of manufacturing has in store.

We’re confident that we will go from strength to strength as the manufacturing industry evolves. If you have any questions about our products and services, do not hesitate to contact us.

Here at European Springs, we’re always busy developing and creating bespoke springs and wire pressings for several applications and industries.

We’re proud to offer our services to the defence industry. We design and manufacture various parts for next-generation airborne smart decoys, high spec electrical connectors, Eurofighters and much more.

In this blog, we’ll take a look at the job we do to support the defence industry and the parts we create for their high powered systems and equipment.

Capabilities and Proficiency

We understand the precision, durability and reliability that the defence industry demands. With the help of our experienced technicians and the latest CNC equipment, we’re able to manufacture custom spring designs and create unique components for vehicles, weapons, and electrical products.

Military officers meet to discuss recruitment. They are using a laptop.

We take the time to understand each brief so that we can consistently produce springs, wire forms and pressings that exceed expectations. We appreciate just how important it is for each functional component to be of the highest quality, guaranteeing safety and precision.

Products and Equipment

We’re renowned for our comprehensive range of springs and wire forms, including compression, tension, torsion and much more. Over the last 70 years, we have established ourselves as one of the most reliable spring manufacturers in the UK and Europe.

Take a look at the list below to see what products and equipment we’ve worked with:

  • Next-generation airborne smart decoys
  • Ruggedised and high spec electrical connectors
  • Antenna for both communications and emergency beacons
  • Rocket motors
  • Small arms and squad support weapons
  • Magazines and magazine springs for sniper rifles
  • Fighting vehicle parts
  • Warship sonar and torpedoes
  • Sights
  • Eurofighter

HAMPSHIRE, UK - JULY, 2016: The Eurofighter "Typhoon" with full afterburners . July 16, 2016 Hampshire, England

Materials and Finishing

We specifically design and manufacture our products to withstand the immense pressures, extreme weather, and conditions present across the defence industry.

Our experienced engineers are trained in working with various materials, including high carbon, high-temperature alloys and corrosion-resistant matter. We only utilise the very best materials in our spring manufacturing processes.


If you’d like to find out more about the high-quality products we offer to various industries, be sure to get in touch with the team here at European Springs and Pressings today. Or, for a more detailed look at the products we produce, take a look at our spring catalogue, where you will find an extensive range of springs and wire forms we make regularly.

At European Springs & Pressings, we have found that the automotive industry is one of the sectors where our products have the widest application. Custom springs are used frequently for building new cars, in everything from disk brakes to suspension and even in your steering wheel.

Continuing our ‘springs in industry’ series, we’d like to look at how springs and pressings are used in the automotive sector, particularly in Formula 1 cars.

Racing Cars 

Springs and pressings are one of the most important components in racing cars. Each Formula 1 car is carefully crafted to give each vehicle optimal performance. In fact, it is estimated that an F1 car consists of 16,000 parts, of which only 10 percent are carried over year on year (Formula1.com).

The build of the race car spring takes into account the speed, cornering ability, grip and downforce. All of these elements are aided and improved by experienced engineering, incredible technology and high-quality components.

Engineer check and control welding robotics automatic arms machine in intelligent factory automotive industrial with monitoring system software. Digital manufacturing operation. Industry 4.0

Disk Brakes 

You wouldn’t necessarily associate F1 driving with braking, but disk brakes are implemented to stop the cars safely when travelling at high speeds. 

Almost every car currently in production, including commercial vehicles, uses disc brakes, and they have proven to be more effective than traditional ‘drum’ style brakes. 

In F1 cars, disc brakes are fitted with rotating discs that are attached to the wheels and then squeezed between the brake pads — this creates a force that helps to slow the car down or bring it to a complete stop.

Pull-rod and Push-rod Front Suspension

Pull-rods were first brought into F1 in the 70s running from the outer end of the upper wishbones diagonally to the lower edge of the chassis. They pull on a rocker that operates the damper spring, alleviating any harsh impacts or uneven surfaces the course may entail.

This suspension system ensures a strong mechanical grip as the pull-rods make the car’s nose lower, thus lowering the height of the centre of gravity and improving handling.

Race car racing on a track with motion blur. 3d model scene.

Most F1 cars now use push-rods as they are easier to install and fit nicely under the vehicle’s low nose. The push-rods flex with the wheels as they encounter any bumps, providing better aerodynamics for a more streamlined race.

The latter is more widely used by teams competing in Formula 1 today due to the vast difference in fitting; push-rods are a lot easier to install.

For both suspension methods, the spring is essential due to the absorption of shock. Energy is transferred with the help of a sound suspension system and can significantly impact the team, regardless of driver skill.

Springs in Suspension 

Torsion bars, leaf, coil and air springs are among the different types of springs used in cars.

Most modern vehicles are fitted with standard coil springs made of steel. High-quality suspension systems are created by a strong spring absorbing the shock forces while driving on uneven roads. 

To see our full range of springs used in various industries, please check out our brochure now.


With over 70 years of experience as a spring manufacturer, we have the expertise and machinery to create a whole host of springs perfect for any application within any industry. 

If you would like any more information about any of our products or services, please contact our friendly team here at European Springs.

The first steps to ease lockdown restrictions have begun in England, with all restrictions forecast for removal by 21st June 2021.

The UK Government’s four stage roadmap to re-open the economy relies on a series of ‘tests’ for easing restrictions, such as the vaccine rollout and lower infection rates. You can view the full COVID-19 recovery strategy here. 

At European Springs & Pressings, we’ve continued to work at close to full capacity despite the challenges presented by Covid-19. We’ve worked hard to invest in the right areas of our business and now that we can see the light at the end of the tunnel, we want to discuss the impact of the pandemic on the manufacturing industry as a whole.

Two Heavy Industry Engineers Stand in Pipe Manufacturing Factory, Use Digital Tablet Computer, Have Discussion. Construction of Oil, Gas and Fuels Transport Pipeline. Back View Sparks Flying

What Does the Roadmap Mean for Manufacturing? 

As a result of the pandemic, many factories worked reduced hours or were forced to close, which has caused unprecedented disruption to supply chains all over the world.

The Office for Budget Responsibility predicted that manufacturing, construction, retail, travel, food industries and education would experience the biggest losses. Though we now know that both sanitary and social distancing restrictions have also disrupted the services sector, which is likely to have a lasting effect. This means that the UK has become more reliant on manufacturers to lead the recovery.

We believe the main steps for recovery and moving forward are:

  • A safe return to work for all employees
  • Establishing future-facing practices and policies 
  • Realising opportunities, such as new technologies and equipment

The Importance of Returning to Work Safely

Safety within manufacturing is a concern for all employees on their return to work and for reopening production. To return to work safely, it’s important to consider guidance, firstly from the Health and Safety Executive on operating safely, as well as providing the correct PPE and implementing practical solutions to transportation, childcare and flexible working for employees.

We must support and strengthen our manufacturing base with the intention of helping employment, whilst also ensuring that the UK can start to level up. In turn, this will warrant higher levels of reissuance and domestic capability.

Building Resilience in Post-Covid19 Manufacturing 

The vulnerability of supply chains has been highlighted as a result of the on-going pandemic. We’ve seen the consequences of an underinvested manufacturing base with limited domestic capacity to produce critical products.

To move forward, it’s important to build for the future. Companies can respond to the crisis by creating mapping projects to better understand our supply chain vulnerabilities. These can include logistics and transportation, allowing your company to build resilience.

How to Improve on Economic Confidence

The effects of the pandemic have changed the manufacturing industry, including how we work and the machinery we’re working with. Adopting new technologies to counter the Covid-19 crisis should coincide with the upskilling for existing employees to use new technologies.

In our January blog, we looked at ‘The Key To Combating Pandemic Effects On Manufacturing’ and two months on, we’re still optimistic about a boom in manufacturing thanks to continued investment in the right technologies.

Make UK, The Manufacturers’ Organisation produced a report in May 2020 outlining the importance of investment in technologies. If you want to find out more then take a look at their report, Manufacturing our road to recovery – the 3 point plan.

In this report, Make UK proposes that the manufacturing industry should introduce an enhanced tax incentive to encourage automation, digitisation and export growth. This incentive could help UK firms to grow their exports once the global economy returns to a ‘new normal’.

It’s never too late to invest in automation technology. By implementing a more robust and automated element to your business, you can reduce the time spent on tasks, save money, and improve your overall safeguarding strategy.

If you’d like to find out more about the ongoing digital transformation in manufacturing then check out our blog on what the future of manufacturing looks like

A portrait of a mature industrial man and woman engineer with laptop in a factory, working.
A portrait of a mature industrial man and woman engineer with laptop in a factory, working.

What’s Coming up in 2021 for European Springs?

Here at European Springs & Pressings, we’re continuing our focus on stability, recovery and growth. We have invested heavily over the past two years in machinery, upskilling our employees and technology which means we are positive about bouncing back from the effects of Coronavirus.

Our team looks forward to welcoming leaders from around the globe at this year’s G7 summit, which will be held in Cornwall in June 2021.

Keep up to date with our blog page and be the first to see the latest information on the manufacturing industry, as well as expert sector insights.

HOW CAN WE HELP YOU?

    Fields marked with an *are required

    If you would like to send drawings with your enquiry, please email us directly with your enquiry and drawings attached to info.bec@europeansprings.com

    This form collects your name, email, company name, phone number and your enquiry so that one of our team can communicate with you and provide assistance. Please check our Privacy Policy to see what we'll do with your information.